Direct drive supply fan for make-up air

DGX and MSX can be configured with a direct drive, backward-curved plenum supply fan.

06/10/2016


DGX and MSX can be configured with a direct drive, backward-curved plenum supply fan. Courtesy: GreenheckGreenheck's air models DGX and MSX can be configured with a direct drive, backward-curved plenum supply fan. Both models offer an operating range capable of 800 to 25,000 cfm and external static pressure up to 4 in. wg. The DGX-P and MSX-P offer additional design solutions when an application requires higher external static pressures. The factory-mounted variable frequency drive provides an inherent soft-start for the supply fan. Available heating options include direct gas-fired, electric heat, hot water and steam coils; cooling options include split direct expansion, chilled water, and evaporative cooling. The new backward-curved plenum supply fan offers low motor horsepower and energy usage.

Greenheck

www.greenheck.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Boiler basics; 2017 Product of the Year winners; Manufacturing facilities Q&A; Building integration; Piping and pumping systems
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me