Direct drive motor assemblies

Applimotion's customized direct drive motor assemblies include precision bearings, encoders, and cabling for a low-profile direct drive solution.

08/19/2013


Applimotion's customized direct drive motor assemblies include precision bearings, encoders, and cabling for a low-profile direct drive solution. Courtesy: ApplimotionApplimotion's custom direct drive motor assemblies are for their ULT, UTH, UTS and UTO brushless frameless motor kits. These assemblies include precision bearings, encoders, mounting features, and cabling to provide a low-profile direct drive solution. With sizes ranging from 10 mm to 500 mm in diameter, pancake profiles as low as 10 mm and large through holes, the custom direct drive solution covers torque from .1 to 1000 NM. These custom direct drive motors are typically used in automated inspection, metrology, material handling, medical diagnostics, as well as robotics and factory automation. 

Applimotion

www.applimotion.com 

- See more Control Engineering motor and drive products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me