Dimming option for lighting control panels

Hubbell Building Automation’s CX Dimming Option Card provides full range dimming allowing users to control their environments while increasing energy savings.

01/23/2014


Hubbell LightingHubbell Building Automation’s CX Dimming Option Card provides 0 to 10 V full range dimming allowing users to control their environments while increasing energy savings. The CX Dimming Option Card offers a low-cost solution for lighting control challenges including stringent energy codes, demand response requirements, and U.S. Green Building Council LEED qualifications. The CX Dimming Option Card can be used in a variety of applications and provides 0 to 10 V output terminals for connection to industry standard fluorescent electronic dimming ballasts as well as LED electronic dimming drivers. In addition to manual raise lower switches, the eight dimming channels can be configured to work in concert with photocells, occupancy sensors, and schedules.

Hubbell Lighting

www.hubbelllighting.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me