Dimmable Ballasts: Consider Digital

08/01/2006


Cheap and technologically superior? That’s what the promoters of a new electronic dimmable ballast are claiming. Lumenergi, formerly Lumenoptics, has come to market with a new name and technology it claims will revolutionize the world of lighting the way the Toyota Prius is changing the driving habits of many Americans.

The growing popularity of daylighting on the building side of the green equation is certainly reason for lighting designers to consider greater use of dimmable electronic ballasts (DEBs). There’s just one problem: “To install dimmable ballasts right now is just too expensive,” says Bill Alling, president and CEO of the Sparks, Nev.-based company. A typical DEB, he says, costs anywhere from $35 to $110 a shot. As a result, they’re less than 2% of the total ballast market.

Alling is hoping to deliver a DEB for about $20 a pop. How? “What we’re doing is digitizing an analog product where we’re essentially taking out a lot of the hardware and replacing it with silicon,” he says.

The technology actually dates back to the 1980s, when a different start-up company Alling was involved with developed a prototype for a major New York-based bank. “When we landed that contract, at first we did a conference room, then a floor, then two floors. It was a very conservative process where we had to start slow and prove it worked,” he says.

That particular dimming technology was then about $80 per ballast. You’ve never heard of it because the company was bought by another manufacturer and was the product taken off the market.

Lumenergi has since reinvented a much more affordable digital DEB and at the right time, as ASHRAE 90.1 and California’s Title 24 drive the need to design more energy-efficient lighting systems. “We cut our teeth on [Title] 24,” says Alling. “And we feel if the cost is right, specifying engineers will embrace this technology.”

The company’s goal is for designers to be able to light about 50,000 sq. ft. of space for under $5,000. Part of that number is derived from the facts that the ballast produces a higher light output and fewer fixtures are required, but also because the DEBs operate on a control system that communicates over passive powerline technology. In other words it communicates over existing power lines, which saves on labor and wiring.

And beyond installation savings the system offers operational savings in the form of peak shaving. “If you look at the yearly power demand of a building, you’d find almost 30% of peak energy occurs at a specific time. So there’s a need to identify that time,” says Alling.

The control system can record and monitor what’s going on power-wise, and the data can be culled at any time, even remotely.

Although this is fairly unique technology, Alling is not looking to corner the market. In fact, he really appreciates an engineer’s need and desire to keep options open when it comes to product specification. The control system can speak any language and is DALI-compatible. And Lumenergi is considering more of an OEM approach to the industry.

”We’re looking for technology partners to drive the DEB market from 2% to 50%,” he says.



Why digital electronic ballasts?

• Lower cost per unit

• Lower installation costs

• Peak-shaving capabilities

• Open communication protocol



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me