Digital soft starter

Baldor Electric Co.’s MST digital soft starter with six SCR three-phase voltage control is available from 7.5 to 1000 hp at 208 to 575 Vac.

05/31/2013


Baldor Electric Co.’s MST digital soft starter with six SCR three-phase voltage control is available from 7.5 to 1000 hp at 208 to 575 Vac. Courtesy: BaldorBaldor Electric Co.’s MST digital soft starter with six SCR three-phase voltage control offers advanced protection for the motor, the soft starter, and the load, ensuring trouble-free operation. Available from 7.5 to 1000 hp at 208 to 575 Vac, this product is suitable for a wide variety of applications including pumps, compressors, fans, and conveyors. The MST digital soft starter features programmable torque control, providing a more linear acceleration during start that reduces wear and tear, and during stop that virtually eliminates pump water hammer. This torque control function was developed and tested in collaboration with pump manufacturers to ensure the best possible stop without water hammer and pressure surges. It also offers integrated advanced motor protection with current sensing, programmable signal relays, programmable analog output, and a built-in keypad interface. MST digital soft starters are available in two styles, an open starter or an enclosed combination starter. 

Baldor Electric Co. 

www.baldor.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me