Digital servo drives for embedded applications

Servo2Go.com announces the release of the Dzralte Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications.

05/03/2012


Servo2Go.com announces the release of the Dzralte Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications.

DZRALTE Series High Performance Digital Servo Drives, Courtesy: Advanced Motion ControlsThe Dzralte Series are digital servo drives that control brushed and brushless servomotors in a compact form factor which make them ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM) which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM drives. The command source can be generated internally or can be supplied externally.  In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The Dzralte Series feature a RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking.  All drive and motor parameters are stored in non-volatile memory.  Drive commissioning is accomplished using AMC’s powerful & user friendly free DriveWare software.

The combination of a DigiFlex Performance DZRALTE servo drive with its DriveWare software establishes a new benchmark in versatility!  Capabilities built into the Dzralte servo drives include:

· Size range:  10-175 V dc Input, 6 A cont.(60A peak) at 10-175 V dc output models

· Full tuning control of all three servo loops: Position, velocity and torque

· Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance

· Status window with over 50 simultaneous channels for drive and system diagnostics

· I/O configuration configurable to latch/non-latch as well as active-high and active-low

· Universal servo motor compatibility by means of automatic commutation adjustment

· Dual Loop Feedback - Increases both stability and accuracy 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me