Digital radio test set has low phase RF signal generator

The 3920B Digital Radio Test Set by Aeroflex features a low phase noise RF signal generator for enhanced spectral purity for narrowband or analog receiver testing.

08/23/2013


The 3920B Digital Radio Test Set by Aeroflex features a low phase noise RF signal generator for enhanced spectral purity for narrowband or analog receiver testing. Courtesy: AeroflexAeroflex Incorporated's (NYSE:ARX), 3920B Digital Radio Test Set is designed for Analog AM and FM, Digital P25, P25 Phase II, DMR, NXDN, dPMR, TETRA and TEDS technologies. The 3920B features a low phase noise RF signal generator in addition to the already advanced functionality available on the Aeroflex 3900 Series Radio Test Sets. The 3920B is the direct replacement for all versions of the Aeroflex 3900 Series, including the 3901, the 3902, and the 3920.

The 3920B's low phase noise RF signal generator provides enhanced spectral purity with SSB phase noise specified at -110 dBc/Hz at 10 kHz offset. This level of performance is achieved at an offset from the carrier that is significantly less than the industry standard for this type of specification, which is typically 20 kHz. The ability of the 3920B to achieve such low phase noise specifications close to the carrier, makes the 3920B an ideal test solution for today’s digital narrowband or analog receiver testing where narrowband phase noise is critical.

Aeroflex Incorporated

www.aeroflex.com 

- See more Control Engineering networking and security products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me