Digital genset controller

DGC-2020HD digital genset controller has a variety of system level controls, reporting and diagnostics, and protection capabilities for complete system management in nearly any genset application.

07/30/2015


DGC-2020HD digital genset controller has a variety of system level controls, reporting and diagnostics, and protection capabilities for complete system management in nearly any genset application. Courtesy: Basler Electric

DGC-2020HD is an all-in-one digital genset controller that loads shared systems. The controller includes tie breaker control and enhanced communication capabilities for total system management. Load-shedding functionality monitors the demand levels on the system. If the generation capabilities are unable to sustain a load, they will open the breaker to that load, continue to monitor the system, and add loads back. Peak shaving and import/export control automatically adjust the level of system generation to control the peak import or export of power. E-mail notifications are sent to designated addresses when an alarm or fault condition is detected so that action can be taken.

Basler Electric

www.basler.com  



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me