Differential pressure sensors

A differential pressure sensor has been added to its variable frequency drive and building management systems.

01/08/2013


A differential pressure sensor has been added to its variable frequency drive and building management systems. Courtesy: TacoTaco has added a differential pressure sensor to its line of hydronic system components. The sensor relays system performance information to a variable frequency drive (VFD) or to a building management system (BMS). The Taco DPS629 monitors differential pressures of air and compatible gases and liquids. The design uses dual sensors that convert pressure changes into a standard 4 to 20 mA output signal for two-wire circuits. Its small size and few moving parts make for exceptional response time and reliability. Terminal block, zero, and span adjustments are easily accessed under the top cover. Designed to meet NEMA 4x (IP66) construction, the unit is applicable for flow elements, heat exchangers, filters, pumps, and coils. 

Taco  www.taco-hvac.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Boiler basics; 2017 Product of the Year winners; Manufacturing facilities Q&A; Building integration; Piping and pumping systems
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me