Diesel emission monitor system

The Rypos AT-IV Active DPF/SCR system monitors the condition of emission controls for a diesel engine and uses predictive analysis to proactively regenerate the DPF and to precondition the exhaust under any load condition or exhaust temperature.

April 11, 2012

The Rypos AT-IV Active DPF/SCR system monitors the condition of emission controls for a diesel engine and uses predictive analysis to proactively regenerate the DPF and to precondition the exhaust under any load condition or exhaust temperature. There are no idle time limitations or cold start restrictions. The filter is packaged in an integrated low-profile housing, and the filter media can also act as a load bank. This system allows users to determine a compliance schedule, and it can be populated with just one reduction technology while allowing for installation when either or both of the remaining requirements are needed.