Design to reduce carbon dioxide emissions

There is general agreement that we have to slow the growth in carbon emissions and then shrink those emissions. Buildings consistently emerge as the best opportunity to reduce emissions.

09/05/2008



According to BuildingGreen.com, climate change has emerged as the dominant environmental concern of our times, and buildings, as a sector of the economy, represent the most cost-effective opportunity for reducing carbon dioxide (CO 2 ) emissions.

Estimating the carbon footprint of a building can be quite simple or enormously complex, depending on what one needs the estimate to do. The simple approach addresses only operating energy and accepts broad-brush assumptions about CO 2 emissions from electricity generation. More sophisticated approaches, which are not yet well established, add other emissions into the mix, including those from transportation, construction, water, materials, and waste management. These more complicated calculations also include greenhouse gasses other than CO 2 .

To achieve long-term carbon-reduction benefits, strategies such as appropriate massing and orientation that are likely to hold up well over time are better than strategies based on mechanical equipment or purchasing policies, which might not last. Client commitment is important for achieving a low-carbon building, and it’s easier to get that commitment if the emissions are expressed in terms that non-scientists can relate to, such as acres of forest or cars taken off the road.

Read the full story: Counting Carbon: Understanding Carbon Footprints of Buildings





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me