Custom direct drive motor systems

Applimotion offers custom drive motor systems with precision encoders and bearings in unique packages. Design engineering services will integrate ULT, UTH, UTS, and UTO frameless motor kits into application-specific direct drive motors.

10/03/2012


Applimotion can create an affordable direct drive solution that fits the application. Courtesy: Applimotion Inc.Applimotion offers custom drive motor systems with precision encoders and bearings in unique packages. Original equipment manufacturers (OEMs) have used Applimotion ULT, UTH, UTS, and UTO frameless motor kits for designing direct drive systems. Applimotion now offers design engineering services to incorporate these frameless motor kits into application-specific direct drive motors.

Whether a system needs special mechanical requirements, special sealing, Autoclave heat cycles, or another harsh environment, Applimotion can create a solution with one of its frameless motor kits inside. Applimotion engineers can provide guidance through the selection of feedback, bearings, and precision mechanical attributes. 

Direct drive motors are finding their way into many new applications as designers see the advantages in reliability, precision, and performance, compared to traditional solutions. If a direct-drive motor is the right solution, but don’t have the resources in house, Applimotion can create an affordable direct drive solution that fits the application.

Applimotion Inc., located in Loomis, CA, makes brushless motors and motor components. Applimotion engineers can create application specific motors for low-volume performance-driven application, produced at its CA facility, or using high-volume value-driven off-shore manufactured motors.

www.applimotion.com

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me