Current-limiting protector

The CLiP-LV design protects under-rated equipment from damage and mitigates arc flash.

07/28/2015


The The CLiP-LV design protects under-rated equipment from damage and mitigates arc flash. Courtesy: G&W ElectricThe CLiP-LV Current Limiting Protector is presently rated for continuous currents of 4,000 A in applications to 750 Vac. It incorporates field-resettable-trigger level ranges and interrupt capabilities up to 100 kA. It also protects against bolted faults and prevents severe stress that can shorten the life of source side generators, breakers, and transformers. This includes protection against cumulative transformer through-fault damage. The CLiP-LV senses faults electronically, permitting a more specific and predictable operating point, and the parallel current-limiting fuse of the CLiP-LV is not subject to aging. In the event of a fault, a current limiter will trigger only on the faulted phase.

G&W Electric

www.gwelec.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me