Critical load protection

Thomas & Betts Power Solutions has enabled the deployment of micro grids with its new Cyberex SuperSwitchGT, which offers autonomous operation and powering from distributed energy sources (islanding).

04/08/2013


Cyberex SuperSwitchGT byThomas & BettsThomas & Betts Power Solutions has enabled the deployment of micro grids with its new Cyberex SuperSwitchGT, which offers autonomous operation and powering from distributed energy sources (islanding). The three-phase Cyberex SuperSwitchGT protects critical loads connected to a distributed energy source, or micro grid, from power quality anomalies on the utility grid by instantly isolating it. The Cyberex SuperSwitchGT uses silicon-controlled rectifiers to connect and disconnect the micro grid quickly to and from the utility grid in 20 μsec or less. This allows critical operation with equipment needing a continuous power source.

Thomas & Betts Power Solutions

www.tnb.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me