Cooling fan for explosive environments

The MIL-901XP fan is rated for use in explosive environments and meets s UL, NEC and ANSI standards.

11/13/2014


The MIL-901XP fan is rated for use in explosive environments and meets s UL, NEC and ANSI standards. Couresty: AMETEK RotronThe MIL-901XP fan by Ametek Rotron meets UL, NEC, and ANSI standards for equipment that will not create an ignition source in explosive environments. It is designed for use in either indoor or outdoor installations where sufficient concentrations of flammable gasses, vapors, or dust are present. Applications include cabinet cooling, heat exchanging, and air exchanging for equipment used in the oil, gas, chemical, mining, and other industries. Construction features include thermal protection, advanced composite propeller material, and permanently lubricated stainless steel ball bearings. Ambient operating temperature range is -54 to +70 C.

AMETEK Rotron

www.rotron.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me