Controlled chilled-beam pump module

Neuton eliminates the expense of a separate chiller, boiler, and secondary water distribution system associated with conventional chilled-beam HVAC designs.

04/14/2016


Neuton eliminates the expense of a separate chiller, boiler, and secondary water distribution system associated with conventional chilled-beam HVAC designs. Neuton blends and recirculates return water within its zone to convert typical 42 and 140°F primary loop water temperatures to optimal 58 or 100°F chilled-beam discharge temperatures. This prevents cooling-mode condensation and heating-season heat stratification. Neuton can control up to 10 chilled beams, depending upon the water flow rate required. Using a controlled chilled-beam pump module design versus a traditional chilled-beam layout reduces job piping material/labor costs by up to 35%.

Semco

www.semcohvac.com


This product is a Finalist in the
Consulting-Specifying Engineer 2016 Product of the Year program. View more Finalists and cast your vote at www.csemag.com/votepoy (voting closes June 30, 2016).



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me