Condensing boiler, water heater

Laars' MagnaTherm is a 95% thermal efficiency modulating-condensing boiler or volume water heater that meets all ASME requirements and is AHRI certified.

04/21/2014


Laars' MagnaTherm is a 95% thermal efficiency modulating-condensing boiler or volume water heater that meets all ASME requirements and is AHRI certified. Courtesy: LaarsLaars' MagnaTherm is a 95% thermal efficiency modulating-condensing boiler or volume water heater available in 2, 3, and 4 million Btu/hr sizes. MagnaTherm offers a 5:1 turndown, small footprint, slim vertical design with removable top section, a stainless steel heat exchanger, and multiple voltage options to easily match building service. The MagnaTherm meets all ASME requirements and is AHRI certified. The boiler features an advanced VARI-PRIME pump control that seamlessly matches the boiler firing rate to pump flow, which reduces boiler pumping costs by up to 70%. The on-board control functionality balances combustion, airflow, and water flow to optimize boiler efficiency. Up to 8 MagnaTherms can be controlled in a cascading boiler bank. The system has a sealed condensate trap that does not need to be primed at start-up. It can accommodate up to 100 ft of vent and meets stringent NOx emission requirements.

Laars

www.laars.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me