Compact photoelectric sensor series has emitter beam for easy setup

Banner Engineering's S18-2 compact photoelectric sensor series are self-contained, dc-operated sensors built with advanced ASIC technology and a red emitter beam that reaches up to 25 m.

10/10/2013


Banner Engineering's S18-2 compact photoelectric sensor series are self-contained, DC-operated sensors built with Advanced ASIC technology and a red emitter beam that reaches up to 25m. Courtesy: Banner EngineeringBanner Engineering's S18-2 compact photoelectric sensor series are self-contained, dc-operated sensors built with Advanced ASIC (Application Specific Integrated Circuit) technology. The diffuse mode S18-2 sensors are resistant to fluorescent light and offer a high level of crosstalk avoidance.

Banner S18-2 sensors feature a powerful and bright visible red emitter beam that reaches up to 25 m (82 ft), which allows for easy alignment and set-up. For ease of use, the S18-2 sensors also offer a highly visible output, and dual-function power and stability indicators. The indicators are comprised of one green and two yellow LED lights. Solid green indicates power is applied and the sensor is ready, while green flashing specifies a marginal sensing signal. The two bright yellow LEDs, visible from both sides of the sensor, indicate the output is conducting.

Featuring a rugged ABS plastic housing, the S18-2 sensors are well sealed against water ingress. A wide operating temperature range of -40 to +70 degrees Celsius ensures optimal performance for diverse applications. For increased flexibility, diffuse models provide a robust 250° sensitivity potentiometer.

Banner Engineering

www.bannerengineering.com 

- See more Control Engineering sensor and vision products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me