Compact diesel engine

The G-drive engines were developed to power the KD Series of diesel industrial generators.

12/09/2016


The G-drive engines were developed to power the KD Series of diesel industrial generators. Courtesy of: KohlerThe line of G-Drive engines was developed to power the KD Series of KOHLER and KOHLER-SDMO diesel industrial generators. The compact engines deliver between 709 and 3608 kWm standby power at 50 Hz and between 891 and 4250 kWm standby power at 60 Hz. Each line co-developed by Kohler and Liebherr contains three engines. Both series of engines incorporate a modular design with common components to reduce spare parts inventory and increase serviceability. Liebherr designed the engines with rail injection, pressures reaching up to 2200 bar. The engine control unit (ECU), is supported by KODIA diagnostic software for intuitive monitoring. The engines turbocharger system optimizes airflow to the cylinders while the low-noise combustion system optimizes pressure. The system works in combination with a rigid engine block, crankcase, and sub-frame to reduce noise and vibration.

Kohler: www.kohlerpower.com

Leibherr: www.liebherr.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me