Communicating wirelessly with CAN networks

CiA has been developing new methods for improving communication through remote and wireless technologies.

10/05/2011


For several years, some vendors have provided CAN gateways with wireless links, especially those with Bluetooth applications. Therefore, devices connecting CAN and wireless networks have become standard for CiA members and technicians. The CiA 812 application note describes use cases for CiA 457 compliant gateways. The CiA 457 CANopen gateway profile specifies the wireless communication links. This includes configuration parameters and diagnostic as well status information. The profile supports Bluetooth, WLAN, and proprietary solutions. In typical applications single or multiple sensors are connected wireless to the CANopen network or remote radio I/O modules control the mobile machinery (e.g. crane and other construction machines). Those user panels are equipped with joysticks, pushbuttons, and other I/O elements. If the wireless connected modules are CANopen devices, a tunneling of CAN messages interpreted as CANopen protocols as specified in CiA 315 is reportedly possible. "Since August, CiA has released internally the CiA 315, CiA 457, and CiA 812 documents, which allow a flexible usage of wireless communication links in a CANopen system," said Holger Zeltwanger, CiA Managing Director. "Especially in mobile machines this will simplify system design of heterogeneous network architectures." The system integrator also should refer to the CiA 302-7 bridge-/router specification, in which the Remote SDO and Remote EMCY protocols are defined.

www.cia.org 

CAN in Automation

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me