Commercial Real Estate GDP Contribution Significant Despite Economic Decline

Study shows Commercial Real Estate Development and Construction annually contribute $288 billion to GDP; down from 2007 contribution of $549 billion. Commercial real estate development and construction is a perpetual and valuable economic engine, with spending and directly related outlays generating a significant financial impact and helping to counter the recessionary forces that have undermined the economy’s performance since December 2007.

01/12/2011


In a new report issued by the NAIOP Research Foundation, the compounded economic impact of commercial development and construction spending reached $288 billion in 2009, as follows:

  • $148.6 billion in hard costs (actual construction costs)
  • $139.4 billion in soft costs (architecture, engineering, marketing, legal, management), site development and tenant improvements
  • An additional $2.52 billion were spent on building operations (maintenance, repair, custodial services, utilities, and management)

Development and construction spending declined in 2009 due to the recession’s economic contraction, yet it still generated an overall positive contribution to the U.S. economy. Direct outlays for construction spending for office, industrial, warehouse, and retail totaled $46.6 billion, down 48% from 2007. And although an additional 264.6 million sq ft of building space was added to the inventory, it represents a decrease of 68.5% compared to 2007.

“This decline in construction spending has resulted in a noticeable effect on the nation’s economy, and it has negatively impacted the ability for communities across the county to pull out of the recession,” said Thomas J. Bisacquino, NAIOP president and CEO. “This report reconfirms that a healthy real estate economy is vital to a prosperous U.S. economy, and the industry is depending on lawmakers and the administration to continue to free sources of capital so that development can recommence, and the trickledown effect will be seen in increased employment numbers and consumer spending.”

Commercial construction spending, employment and personal earnings in a 2009 vs. 2007 comparison:

2009

2007

Commercial Construction Spending Totals

$288 billion

$549 billion

Employment Totals

2.4 million jobs

4.89 million jobs

Personal Earnings Totals

$89.1 billion

$170.1 billion

Report data shows that building (both commercial and residential) and non-building (roads, bridges, etc.) construction spending in 2009 totaled $908 billion and accounted for 6.4% of the GDP, well off its high in 2007 when construction spending totaled $1.16 trillion and accounted directly for 8.5% of the GDP.

The data and analysis are detailed in “The Contribution of Office, Industrial and Retail Development and Construction to the U.S. Economy” a report authored by Dr. Stephen S. Fuller, director of the Center for Regional Analysis at George Mason University, and funded by the NAIOP Research Foundation.

Recession Effects

The effects of the 2008-2009 recession were felt by all segments of the economy and the construction sector was disproportionately impacted by the collapse of the financial markets and subsequent decrease in demand for new housing and non-residential building space.

Residential construction peaked in 2005 with starts totaling 2.07 million units and declined to 554,000 housing units in 2009, a decrease of 73%. During the first three years of this same time period (2005-2008), non-residential building construction outlays continued to increase, peaking in 2008.

This extended spending helped offset an industry-wide decline that would worsen in 2009 and has continued through 2010. However, with the national economy’s accelerating recession, non-residential building construction outlays fell by 20.4% in 2009.

Industry Prepared for Employment Growth

Commercial development must be on the leading edge of the eventual economic upturn and be equipped to meet companies’ expansion needs as joblessness numbers decline and employment grows. Using standard jobs-per-square feet estimates, the new space developed in 2009 has the capacity to house 674,300 jobs with an annual payroll of $29.8 billion.

The potential productive value of this new building space represents a significant annual contribution to the local, state, and national economies. In addition to the significant contribution to GDP and job and income growth nationwide that constructing 264.6 million sq ft of new building space represents, these buildings continue to provide economic benefits to their economies after construction is completed. These economic impacts include outlays required to maintain and operate these buildings and the value of the work done in them.

  • The operating outlays associated with the office, warehouse and retail space built in 2009 are estimated to total $871.2 million annually.
  • This direct spending for building operations would add $2.525 billion to the GDP, support 21,222 new jobs, and generate $801.4 million in new personal earnings.
  • These operating outlays are annual and recur yearly over the life span of the building.

State Rankings

The 10 states with the largest construction values (hard costs only) accounted for 56.1% of the construction outlays in the United States, while the top 20 states accounted for 79.4%. The most populous states and those with the largest or best performing economies tended to rank highest by value of construction outlays, although there were variations depending on building type.

Rankings

Office

Industrial

Warehouse

Retail

All Categories

1

N.Y.

 

IL

TX

TX

N.Y.

2

VA

OH

CA

FL

TX

3

CA

TX

FL

CA

CA

4

TX

N.Y.

N.Y.

IL

VA

5

FL

AZ

PA

N.Y.

FL

6

N.C.

PA

AZ

GA

IL

7

WA

CA

GA

N.C.

OH

8

MD

N.M.

OH

PA

PA

9

OK

LA

WA

OH

N.C.

10

D.C.

CO

N.C.

WA

AZ

Sources: McGraw-Hill Construction Analytics, GMU Center for Regional Analysis

About the Report

This report enables the commercial real estate industry to quantify the numbers that demonstrate its considerable and sustained contribution to the U.S. economy. With this data, public, state, and local governments can learn the ways that commercial development makes a positive and lasting contribution to their communities, including:

  • Supporting the creation of jobs
  • Generating personal earnings
  • Promoting new spending activity across the breadth of the economy

The report was produced using data provided by the Bureau of Economic Analysis, U.S. Dept. of Commerce, U.S. Census Bureau, McGraw Hill Construction, and a NAIOP member survey. The NAIOP Research Foundation published two previous editions of this report in 2006 and 2008.

To access a copy of the report, please contact Kathryn Hamilton, NAIOP vice president for marketing and communications, at (703) 904-7100 or hamilton(at)naiop.org



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.