Commercial outdoor units

Mitsubishi Electric expands its commercial Y-Series outdoor units

11/17/2011


Mitsubishi Electric Cooling + Heating (Mitsubishi Electric) has made significant updates to its commercial Y-Series outdoor units, providing end users with a system that increases a facility’s energy efficiency. The Y-Series is available in 208/230 V, 3-phase or 460 V, 3-phase units and has an outdoor temperature range of -4 to 60 F when heating and 23 to 115 F when cooling, an increase from the previous model, which reached only 109 F maximum. Available in three module sizes: P72 (36 ¼ in.), P96 (48 1/16 in.) and P120/P144 (69 in.), the Y-Series will exceed proposed ASHRAE 90.1 efficiency ratings for 2010, and sizes ranging from 6 to 20 tons meet or exceed Energy Star light commercial requirements. The CMCN consists of remote controllers, centralized controllers, building management system interfaces, and integrated software. The CMCN provides advanced, user-friendly control for each zone of a building with options for individual or centralized temperature control.

www.mitsubishielectric.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me