Combination fire/smoke dampers

DFD, FD, and FSD series fire and combination fire/smoke dampers are approved for installation in horizontal, nonconcrete, fire-rated barriers and can be specified for use in UL floor/ceiling design I503.

02/03/2016


DFD, FD, and FSD series fire and combination fire/smoke dampers are approved for installation in horizontal, nonconcrete, fire-rated barriers and can be specified for use in UL floor/ceiling design I503. Courtesy: GreenheckGreenheck's DFD, FD, and FSD series fire and combination fire/smoke dampers are approved for installation in horizontal, nonconcrete, fire-rated barriers. They can be specified for use in UL floor/ceiling design I503, which is a 2-hour fire-rated floor/ceiling assembly made from steel studs and gypsum board. This installation method simplifies the process of protecting duct penetrations at the top and bottom of fire-rated building shafts. Installing DFD, FD, and FSD series dampers in a horizontal non-oncrete barrier results in increased usable space for the owner, flexibility for the design professional, and reduced installation time for contractors.

Greenheck

www.greenheck.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me