Clean commissioning requirements

This seminar provides an example cleanroom, explains the different standards that can have an impact on cleanroom commissioning, and presents an outline for commissioning the example cleanroom.

07/23/2012


Many of the most complex and contamination-sensitive manufacturing processes require cleanrooms. Cleanrooms require more stringently controlled environmental conditions and have substantially more commissioning testing equipment than a typical office building. This seminar provides an example cleanroom, explains the different standards that can have an impact on cleanroom commissioning, and presents an outline for commissioning the example cleanroom.

> > Download the presentation

Vincent Sakraida, PE, LEED AP, Cleanroom Product Manager, Engineered AirPresenter: Vincent Sakraida, PE, LEED AP, Cleanroom Product Manager, Engineered Air

Sakraida is the Cleanroom Division Product Manager for Engineered Air. He has a bachelor's degree in mechanical engineering from the Georgia Institute of Technology.

During the past 30 years, Sakraida has participated in the engineering, construction, and commissioning of many high technology facilities, including: hospitals, pharmaceutical production, medical devices, R+D laboratories, electronics, and other manufacturing production facilities. He has over 25 years of experience in the design, construction, and commissioning of cleanroom facilities.

Sakraida was an ASHRAE Distinguished Lecturer from 2008 to 2010. He is an active corresponding member on the ASHRAE TC9.6 (Healthcare) and TC9.11 (Clean Space) committees. Sakraida has authored numerous articles for Engineered Systems and Heating Piping Air Conditioning magazines which included the article "Cleanroom Design in Ten Easy Steps." He is a member of the editorial advisory board for Engineered Systems magazine.

Sakraida is also a member of the Institute of Environmental Sciences and Technology, ASHRAE, the International Society of Pharmaceutical Engineering, and the American Society of Healthcare Engineers.

Presentation provided by the National Environmental Balancing Bureau (NEBB).


No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me