Ceiling-mount air conditioner

The CMW30 ceiling-mount air conditioner by MovinCool is designed for areas with dense heat loads.

03/02/2012


The CMW30 ceiling-mount air conditioner by MovinCool is designed for server rooms and other applications with dense heat loads, but where a MovinCool air-cooled model cannot be used due to the lack of available space to direct hot exhaust air into. The unit’s large cooling capacity is rated at 29,400 Btu/h total and 22,000 Btu/h sensible for computer rooms. The compact, self-contained CMW30 is only 20 in. high, enabling it to fit above a drop ceiling. A built-in mounting bracket, flanges, and vibration isolators allow easy, low-cost installation using standard, off-the-shelf hardware. No external condensing unit, refrigerant connections, or charging are necessary, further reducing installation as well as maintenance costs. Based on the same engineering technology as the MovinCool CM25 air-cooled model, the CMW30 features a high integrated-energy-efficiency ratio (IEER) of 17.0, made possible by an energy-saving, variable-speed inverter compressor and inverter fan motors.

 

www.movincool.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me