BPHEs for chillers

Complete high-efficiency product range for chiller applications available.


Complete high efficiency product range for chiller applications available.SWEP offers a wide range of brazed plate heat exchanger (BPHE) sizes with different plate geometry and different distribution devices to suit the various chiller applications. The technology allows the pressure drop on the secondary side to be reduced while maintaining good heat transfer. In SWEP BPHEs, the technology reduces the hold-up volume of the inner circuit by 30%. This lowers the charge of R410A, saving money on refrigerant and helping manufacturers comply with environmental legislation. Furthermore, the refrigerant channels are narrower, which increases heat transfer and hence efficiency. On the secondary side, the pressure drop is lower. Easy to install and use, the product is small yet flexible, which makes it a particularly good choice for economizer applications and small water coolers.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me