Blower coil product line

Titus HVAC has upgraded its blower coil product line with compact air handlers that have capacity to service larger facilities.

10/06/2015


Titus HVAC has upgraded its blower coil product line with compact air handlers that have capacity to service larger facilities. Courtesy: TitusTitus HVAC has upgraded its blower coil product line with horizontal and vertical compact air handlers. Installed in ceilings, horizontal blower coils offer an application flexibility, while maintaining a simple, easy-to-install unit design. The vertical belt-driven units can be laid on top of each other and used in applications with a larger volume. Reduced footprint vertical models are used where floor space is at a premium and extreme space restrictions exist. The blower coils, which range from 800 to 10,000 cfm, have the capacity to service larger facilities while their belt-driven system offer flexibility in terms of fan speed and cost advantage. Blower coils satisfy the indoor air quality requirement of any commercial applications including schools, health care facilities, and retail and office buildings.

Titus

www.titus-hvac.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me