Blast from the past – Revit circa Summer 2002

Going through an old hard drive today looking for some files I stumbled upon my very first Revit tendering.

04/22/2013



Courtesy: Jafvert Mueller Architects Inc. and Cannon DesignGoing through an old hard drive today looking for some files I stumbled upon my very first Revit tendering. This was my first Revit project done in Revit 5.0 in the summer of 2002. I learned Revit over the weekend at home locking myself in my room for two days living off pizza and Chinese food delivery. On the next Monday I started this Revit model and it needed to be rendered and sent to Switzerland for approval of the client by Friday of that same week. Since Revit was still relatively new in those days, there were no books to learn from, only the help menu, an 18 page pamphlet that came with the software and the Zoog Design Revit forums (now part of AUGI).

This rendering was done entirely inside of Revit with no Photoshop other than creating the Swiss flag as a decal for the flagpole. Revit at the time used Accurender and the rendering time was a couple of hours on the best PC we had at the time. Not bad for my very first Revit project and having no rendering experience in any application. Sometimes a deadline and the freedom and trust from the firm that you will get it done leads to some amazing outcomes. Thank you Steve Mueller from Jafvert Mueller Architects in Bloomington, Minn., for the trust and freedom that started me on the path to learning Revit that has led me to Cannon Design.

The modern Revit is capable of so much more. What can you produce with it?



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.