BIM for power control system

Emerson Network Power’s ASCO Power Control Systems has added building information modeling (BIM) capability and can monitor and protect multiple-genset power systems.

09/26/2013


Emerson Network Power’s ASCO Power Control Systems has added building information modeling (BIM) capability and can monitor and protect multiple-genset power systems. Courtesy: Emerson Network PowerEmerson Network Power’s ASCO Power Control Systems has added building information modeling (BIM) capability that can reduce the time typically required for installation and approvals, and avoid expensive rework. The BIM capability is available with all ASCO Power Control System lineups, which start, synchronize, parallel, monitor, and protect multiple-genset power systems. A lineup comprises a master control section and one or more single- or dual-generator sections. They are built to order and fit to order. The 3-D digital model represents each section in a lineup for a customer's project. The model shows height, width, and depth dimensions; clearance zones; locations and directional swing of doors; circuit breaker placement; and cable-entry cutouts. The information helps consulting engineers ensure adequate thermal spacing between the lineup and other equipment, clearance and placement for lifting devices for circuit breakers, and proper conduit routing.

Emerson Network Power

www.emersonnetwork.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.