Ball valves for plumbing, hydronic applications

The ProPEX Lead-free (LF) Brass Commercial Ball Valves are designed for plumbing and hydronic distribution applications and feature blow-out-proof stems and are available with stem extension kits.

11/14/2014


The ProPEX Lead-free (LF) Brass Commercial Ball Valves are designed for plumbing and hydronic distribution applications and feature blow-out-proof stems and are available with stem extension kits. Courtesy: UponorUponor's code-listed ProPEX Lead-free (LF) Brass Commercial Ball Valves are designed for PEX-to-PEX connections in plumbing and hydronic distribution applications. The full-port valves are available in sizes from ½ to 2 in. and feature blow-out-proof stems and are available with stem extension kits to accommodate up to 2-in. of insulation in insulated piping applications. The valves feature stem extension kits to accommodate up to 2-in. of insulation in insulated piping applications. Additionally, both ends of the valves are manufactured with the ProPEX fitting system for expansion connections that cannot be dry fit.

Uponor

www.uponor.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me