Augmented CAT 6A connector

Augmented CAT 6A connector is independently tested by Intertek/ETL to exceed component performance as defined in the recently finalized ANSI/TIA/EIA-568-B.2-10 standard.

04/15/2008


Augmented CAT 6A connector is independently tested by Intertek/ETL to exceed component performance as defined in the recently finalized ANSI/TIA/EIA-568-B.2-10 standard. This new standard defines performance and testing requirements up to 500 MHz for Augmented Category 6 cabling systems to support the operation of IEEE 802.3an 10GBASE-T applications up to 100 meters. The TIA standard was approved for publication at the TIA TR42 engineering committee on February 8, 2008. For more about CAT 6A connectors from Leviton, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me