Arup Thoughts: Codes, standards and sustainability

Design engineers often get very excited about systems that reduce the environmental impact of our buildings, like solar hot water systems and rainwater harvesting.

12/31/2015


Design engineers often get very excited about systems that reduce the environmental impact of our buildings, like solar hot water systems and rainwater harvesting. Courtesy: ArupDesign engineers often get very excited about systems that reduce the environmental impact of our buildings, like solar hot water systems and rainwater harvesting. Our designs are (rightly) influenced by regulations, codes and standards. But regulations, codes and standards do not always keep pace with how buildings, systems and people interact. We need up-to-date data.

For example, engineers estimate the maximum demands placed on hot and cold water systems so that the systems will provide water at the required temperature and flow rate. The designer needs to consider the likely maximum demand at any one time, which in turn determines the size of the water system. This is fairly easy for a home but more complex for a hospital or a student accommodation block, where demand is harder to predict. This estimation has a knock-on effect on associated equipment such as the size of the central hot and cold water plant - including pumps and pipe sizes.

The design data underpinning these codes was mostly collated in the 1970s, based on the 'loading units' methodology. But water appliances and patterns of use have changed dramatically since then. New water appliances have appeared and others have become more efficient. If the codes are followed, it is likely that hot and cold water systems will be oversized (and therefore not as economical) which can also lead to other costs such as increased space take, increased energy and water use as well as lower throughput of water and the water quality issues that brings.

Across the world, there are many methodologies to tackle this simple design issue and they all aim to provide the designer with a way of estimating the peak (simultaneous) hot and cold water loads. They either build up the loading using a factor for each group of water using appliances or they use diversity factors to estimate the peaks.

Working internationally, the UK industry has recognised that fundamental design data used for sizing hot and cold water systems is out of date. So a team has begun to collect new data that will inform a new methodology. Arup has helped pull together support from across the industry working with Heriot Watt University to develop proposals that will 'right-size' hot and cold water supply systems. If we get this right, then it will reduce their environmental impact, as well as lower capital and operating costs.

So while renewable technology and water-saving innovations can make a big contribution to environmental problems, we need to bear in mind that they're only one part of the system. To maximise energy and water savings, we need to make sure that all our estimates are based on up-to-date, accurate data.


Martin Shouler is Arup's global skills leader for environmental services engineering and works on a wide variety of projects related to water and wastewater systems. This article originally appeared on Arup Thoughts. Arup is a CFE Media content partner.

Edited by Ksenia Avrakhova, production coordinator, CFE Media, ksia94@gmail.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me