Art Preservation Through Better IAQ

At the Museum of Fine Arts (MFA) in Boston, preserving priceless works of art for future generations is the highest of priorities. The MFA houses approximately 350,000 objects, including some of the world's greatest collections of 19th-century American paintings and decorative arts, French paintings and silver, Egyptian and Asian art.

06/01/2001


At the Museum of Fine Arts (MFA) in Boston, preserving priceless works of art for future generations is the highest of priorities. The MFA houses approximately 350,000 objects, including some of the world's greatest collections of 19th-century American paintings and decorative arts, French paintings and silver, Egyptian and Asian art.

A few years ago, the MFA staff noticed a mold problem developing in some of the humidifiers. David Geldart, director of facilities at the MFA, explains, "It's very common for mold to develop in air-handling systems and generate spores that travel through the airstream to the occupied space, where it can be very detrimental to old photographs and other works of art."

To maintain good air quality and preserve the art, the staff had to drain and clean the humidifiers almost daily.

"This approach kept the mold growth in check but created a costly maintenance headache," says Geldart. "Even with all our efforts, a musty odor caused by the mold was evident in some galleries."

Seeking a better solution

To help preserve their collection and create a healthier environment, MFA officials decided to embark on an indoor-air-quality program. But because cleaning agents such as chlorine posed a danger to artwork, the MFA needed to find an alternate option.

Museum staff learned of a new technology—based on ultraviolet (UV) light in the "C" band of the spectrum, or UVC—for the control of mold proliferation in air-handling equipment.

The germicidal properties of UVC light have been used for decades in water purification and other applications. But when conventional UVC devices were tried in air-handling equipment in the 1950s, they appeared to fail. UVC devices encountered drastic output losses when placed in moving or cold airstreams; thus, they lost their ability to destroy any harmful microbes.

In the mid-1990s, a new generation of high-output UVC devices were designed specifically for use in building heating, ventilation, air-conditioning and refrigeration (HVACR). The newer devices were shown, in testing, to destroy mold, viruses, bacteria and other microorganisms in HVACR equipment—without the use of chemicals or ozone.

Working with the vendor, the MFA decided to conduct their own test of UVC devices in the air handler experiencing the worst problems. Before installing the UVC devices—above the humidifier sump and downstream of the chilled-water coils—the installers took samples of the mold and accumulated organic materials in four locations. Cultures confirmed high concentrations of mold in all four samples. After the UVC devices had been operating for just one week, follow-up sampling showed the same areas to be virtually sterile.

After continuing the study for six months, the MFA was convinced of the UVC product's effectiveness. The MFA equipped 19 remaining air-handling systems with UVC emitters on a phased basis. While these air handlers are also equipped with state-of-the-art, high-efficiency air filters for particulate removal and carbon filters for odor control, the UVC devices provide an added dimension of performance beyond that attained through air filtration alone.

Operational benefits

Geldart reports that the standing water in the system is much clearer now, nearly eliminating his staff's twice-a-year maintenance and cleaning procedures.

"In addition, the perpetually clean coils are more energy efficient," Geldart comments. "Between the maintenance and energy savings, the lights definitely pay for themselves."

For more information on UVC Emitters from Steril-Aire, circle 102 on the Reader Service Card on page 49.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Boiler basics; 2017 Product of the Year winners; Manufacturing facilities Q&A; Building integration; Piping and pumping systems
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me