Applimotion ULT Direct Drive frameless motors get larger through holes

Applimotion ULT Direct Drive frameless motors enable new applications, such as camera vision systems; Applimotion now offers some of the thinnest radial cross-section motors available.

11/06/2009


Applimotion ULT Direct Drive frameless motors get even larger through holes.
Applimotion ULT Direct Drive frameless motors get even larger through holes.

 

Loomis, CA - Applimotion's ULT Series get even larger through holes. Driven by customer demand and new applications in camera vision systems, Applimotion now offers some of the thinnest radial cross-section motors available, the company says. Whether it is an optics application with line of sight through the motor's center, or a need to maximize the wiring payload in a slip ring gimbal system, these motors can help. Initial sizes in the 2.5 and 4.5 inch diameter are offered. Future sizes are planned. These motors remain true to the ULT ultra-thin origins with very low profile construction. ULT motors operate using standard three phase brushless dc or brushless ac drivers with voltage ranges from 12-300 volts. Hall device options are available.

There is no need to only go slowly with Applimotion ULT motors. Direct Drive doesn't necessarily mean low speed. The motors can now achieve speeds up to 10,000 rpm with the correct electrical match between the motor and driver. Applimotion continues to quickly react to customer feedback providing unique motor options in less lead time than the competition requires for their standard products. The ULT motor line has evolved over the last 10 years with over 200 models to choose from.

Applimotion's stated goal is to make unique brushless motors affordable. Applimotion engineers can create application specific motors for OEM customers. Whether it's a low volume performance driven application produced in CA, or a high volume value driven off shore manufactured motor, Applimotion says it has a solution.

Also read from Control Engineering :

- Frameless motors: Ultra-thin ring motors get faster ; and

- The latest on the Motors & Drives product channel .

- Edited by Mark T. Hoske, editor in chief, Control Engineering , www.controleng.com

 





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me