ANSI/AMCA Standard 210-07 - ANSI/ASHRAE Standard 51-07 now available

The American National Standards Institute approved the standard in August 2007; ASHRAE approved it in March. Standard 210-07, "Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating," is now available.

04/02/2008


The Air Movement and Control Assn.ting Fans for Certified Aerodynamic Performance Rating.”

According to AMCA officials, this standard establishes uniform methods for laboratory test of a fan or other air-moving device to determine its aerodynamic performance in terms of airflow rate, pressure developed, power consumption, air density, speed of rotation, and efficiency for rating or guarantee purposes.
This standard applies to a fan or other air-moving device when air is used as the test gas with the following exceptions:

(a) air circulating fans (ceiling fans, desk fans);
(b) positive pressure ventilators;
(c) compressors with inter-stage cooling;
(d) positive displacement machines;
(e) test procedures to be used for design, production, or field testing.
The standard www.amca.org .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me