Another Boost for DG

Today's efforts to boost electricity-transmission capacity might be better addressed through incorporating more distributed-generation resources than by building new transmission lines, argues a new book published by the Rocky Mountain Institute (RMI). Entitled Small is Profitable, the book suggests that the large central-plant scheme on which today's electricity-production systems are based no...

12/01/2002


Today's efforts to boost electricity-transmission capacity might be better addressed through incorporating more distributed-generation resources than by building new transmission lines, argues a new book published by the Rocky Mountain Institute (RMI). Entitled Small is Profitable , the book suggests that the large central-plant scheme on which today's electricity-production systems are based no longer make sense.

The authors, a group of RMI researchers and consultants, state that the central-plant model was developed during a time when the transmission systems were more reliable than the power plants. System designers tied multiple plants together with a large-scale transmission grid to help ensure reliability if any single plant went down. The authors say that today's transmission lines have become stretched to their performance limits, while small generating-facility performance has increased markedly. This makes producing power at the local or on-site level a better financial decision than fighting the battles required to increase current transmission capacity.

The authors believe more holistic cost-benefit analyses of distributed generation's value will lead more facilities to incorporate fuel cells, cogeneration plants, photovoltaic cells and other distributed-generation equipment. Such analyses, which would include such factors as portability, low fuel-price volatility and better fault management, would give a better picture of the current system's true costs, claim the authors. They go on to list 207 specific benefits distributed generation can offer.

The book can be accessed online at: www.smallisprofitable.org .

From Pure Power, Winter 2002





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me