Analog pressure and temperature transmitter

Automated Control Engineering Group (A.C.E.) and STS introduces ATM.1ST/T and ATM.1ST/N/T analog pressure and temperature transmitters.

06/26/2012


Automated Control Engineering Group (A.C.E.) and STS introduce the newly released  ATM.1ST/T and ATM.1ST/N/T analog pressure and temperature transmitters for highly dynamic measurements.

STS ATM.1ST/T analogue pressure and temperature transmitter, Source: Automated Control EngineeringWith the advantage of a combined pressure and temperature sensors the ATM.1ST/T is very well-suited for a wide range of demanding applications that require reliable and accurate measurements.

Pressure and temperature process functions are contained in one elastomer-free process connection (i.e. all connections are welded). This means that the temperature sensor is located in the medium.

  • Pressure measuring range: 100 mbar to 25 bar
  • Accuracy: ≤ ± 0.25 / 0.10 % FS
  • Temperature measuring range: -50-150 C
  • Operating temperature: -40-125 C
  • Process temperature: -50-150 C
  • Output signal: 4-20 mA
  • Materials: Stainless steel 

 See other process instrumentation products at controleng.com/instrumentation



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.