AHRI launches VRF certification program

AHRI's certification program is for variable refrigerant flow (VRF) multi-split air conditioners and heat pumps.


AHRI has introduced a new certification program. The equipment in the variable refrigerant plow (VRF) program is rated and tested in accordance with AHRI Standard 1230, Performance Rating of Variable Refrigerant Flow Multi-Split Air Conditioning and Heat Pump Equipment. Systems sized under 65 MBH are currently certified to AHRI Standard 210/240.

This certification program:

  • Covers matched variable refrigerant flow multi-split air-conditioner and multi-split heat pump systems that comply with either the National Appliance Energy Conservation Act (NAECA) or the Energy Policy Act (EPACT), and use distributed refrigerant technology with cooling and heating capacities for outdoor units from 12,000 Btu/h [3508 W] to 300,000 Btu/h [87,692 W] and indoor units from 5,000 Btu/h [1,462 W] to 60,000 Btu/h [17,538 W]. Each indoor unit is designed to condition a single zone.
  • Applies to variable refrigerant flow multi-split systems consisting of the following matched components: a) an outdoor unit with single or multiple compressors or variable capacity compressor or with a variable speed drive; b) indoor unit(s) that have a coil, air movement device intended for single zone air distribution, and a temperature sensing control; and c) a zone temperature control device.
  • Covers VRF multi-split systems and heat recovery VRF multi-split systems covered in AHRI Standard 1230. Included are multi-split, matched system air-conditioners and heat pumps irrespective of their type of electric power source, or secondary fluid (e.g. air-to-air or water-to-air).


There are currently five participants in the program: Carrier, Daikin, LG Electronics, Mitsubishi, and Sanyo. Testing will be conducted at Intertek’s testing facility in Plano, Texas. Performance data for certified products can be found in the AHRI Directory of Certified Product Performance.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.