AHR, the economy and engineers

Going into this year's Air-Conditioning, Heating and Refrigerating Expo/ASHRAE Winter Conference, I wasn't quite sure what to expect. A number of HVAC manufacturers, with whom I had spoken prior to the show, were concerned that attendance would be down significantly as the result of the sagging economy and lingering fears about flying in the wake of the attack on the World Trade Center th...

02/01/2002


Going into this year's Air-Conditioning, Heating and Refrigerating Expo/ASHRAE Winter Conference, I wasn't quite sure what to expect. A number of HVAC manufacturers, with whom I had spoken prior to the show, were concerned that attendance would be down significantly as the result of the sagging economy and lingering fears about flying in the wake of the attack on the World Trade Center this past fall. For them, this, of course, begged the question as to whether it was worth it to exhibit.

Indeed, some major industry players, including York, Carrier and Trane, declined to exhibit. Furthermore, many manufacturers I spoke with, both before and at the show, had the perception that the people they want to reach—specifying engineers—were few among the many walking the floor.

So in meeting with a number of engineers at the conference, I decided to pose the question. One engineer I dined with said that he simply felt there was not enough engineering expertise on the floor to make it worth his while. Another gentleman, heavily involved in a number of ASHRAE committees, said he simply didn't have the time. On the other hand, several other engineers did ,and we even latched onto a few for an insider's view of the show (please see our ASHRAE/AHR roundup in expanded Home Page coverage on p. 14).

Those forays onto the AHR Expo floor, in this reporter's eyes, revealed aisles full of people with seemingly good booth traffic. In truth, overall show attendance was down from past years, but with the smaller Atlantic City venue, it appeared otherwise, and both attendees and vendors seemed happy with a turnout that was definitely beyond their expectations.

That being said, other news of late—K-Mart entering Chapter 11, and Toys "R" Us closing hundreds of stores nationwide—tends to put a damper for me on the buzz generated at the show. A number of economists I've dealt with claim the foremost indicator of a true recession is consumer spending. In other words, when the "average Joe" starts to hold on to his dollar, watch out. These two outlets, it seems, are very dependent on the average Joe.

By the size of our past few issues, it's obvious we've also been feeling the crunch of the economy. I've been hopeful that maybe, in part, it's just the time of the year, and things will pick up. However, not all in our industry are so optimistic. And with the announcement of "Category Killers" like K-Mart and Toys "R" Us going down—and certainly the whole Enron mess—what does that mean for the building market? Are you more optimistic, or are we heading for some really tough times? And as far as trade shows, are they of value to engineers?

Please shed some light:

jcrockett@cahners.com





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me