Actuator with reverse parallel motor mount

The new reverse-parallel motor mount reduces the length of the Tolomatic ERD actuator while increasing mounting flexibility and motor selection in electric actuator applications.

09/20/2012


The new reverse-parallel motor mount reduces the length of the Tolomatic ERD actuator while increasing mounting flexibility and motor selection in electric actuator applications. Courtesy: TolomaticTolomatic’s ERD electric cylinders are now available with a reverse-parallel motor mount that makes a more compact package and belt reduction options that offer flexibility in sizing the motor. The motor is mounted in parallel with the actuator instead of inline, which reduces the length of the total package and, with the addition of a rear clevis pivot mount, provides greater versatility in mounting the actuator.

The ERD is an economical rod-style electric actuator designed as an alternative to pneumatic cylinders and an option for automating manual processes. The products are suitable for a wide variety of applications, including product changeovers, pick-and-place, pressing, diverting, heat-staking / sonic welding and more. The actuators can be built to order in stroke lengths up to 24 inches (609.6 mm). 

The ERD electric cylinder family is available in four body sizes that are approximately equivalent to 5/8-in. (15.9 mm), 1-in. (25.4 mm), 1.5-in. (38.1 mm) and 2-in. (50.8 mm) bore pneumatic cylinders. The actuators are available in stroke lengths from 8 to 24 inches (203.2 mm to 609.6 mm), and forces up to 500 pounds (2,224 N). The ERD is compatible with most NEMA and metric mount stepper and servo motors to create a flexible, powerful electric actuator solution.

Tolomatic

www.tolomatic.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me