2017 40 Under 40: Stephanie Guy, PE, LEED AP; 34

Project Manager, Alvine Engineering

05/15/2017


Stephanie Guy, PE, LEED AP; 34

Project Manager, Alvine Engineering, Omaha, Neb.

BS and MS Architectural Engineering, University of Nebraska

Stephanie Guy, PE, LEED AP; 34

Guy is project manager at Alvine Engineering in Omaha, Neb. with more than 10 years of mechanical design and project management experience. She prides herself on designing energy-efficient mechanical systems for all building types, regardless of size. She started her career at a large architectural engineering firm in Omaha where she interned after graduating with her bachelor’s degree and continued to work at that firm part time as she finished her master’s degree the following year. Guy accepted an advancement opportunity with Alvine Engineering in 2010. Since then, she has been promoted to project manager, and most recently, to a resource manager, overseeing a mechanical team of 10. In addition to mechanical design, she assists in assigning staff for all projects and provides performance reviews and professional guidance for everyone on her team. As a resource manager, Guy provides feedback and gives advice to the Alvine executive team. She proudly maintains an open-door policy for her team to discuss ideas and issues beyond the day-to-day work at Alvine Engineering. She continues to impact future generations of engineers with her involvement in the architectural engineering program at the University of Nebraska and her involvement with the national Board of Governors for the Architectural Engineering Institute. She has served two full 3-year terms on the Architectural Engineering Industry Advisory Committee. Guy runs to unwind. She has participated in several organized races including a couple of half-marathons, with her favorite race being the Market-to-Market relay in which teams race 76 miles from Omaha to Lincoln, with each team member running segments of 3 to 5 miles. In the summer, she and her family, which includes four daughters, can be found camping at one of the many campsites surrounding the Omaha area and beyond. Guy also loves to travel.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me