2013 LIGHTFAIR International conference announced

The 2013 LIGHTFAIR International Conference will be April 21-25, 2013, at the Pennsylvania Convention Center.

01/09/2013


Set to take place at the Pennsylvania Convention Center, the 2013 LIGHTFAIR International Conference program will align with topics addressed on the show floor as well as within the industry as a whole.

Through the strategic selection of subjects and by tapping more than 100 industry experts as speakers, LFI has reinforced its position as the world’s largest and most comprehensive annual lighting educational platform.  The 2013 program will present 66 course offerings—totaling more than 200 hours with AIA, ASLA, BOMI, IDCEC, IES and NCQLP accreditation—offered in the Pre-Conference LIGHTFAIR Institute and Conference.

The LFI curriculum has been enhanced to 15 educational tracks, providing a comprehensive program that is easy to navigate with the new tracks. The courses are designed to educate attendees on the industry’s latest trends, innovations and solutions.

For LIGHTFAIR International 2013, the LIGHTFAIR Institute Pre-Conference program takes place from Sunday, April 21 – Monday, April 22, 2013 and the LFI Trade Show and Conference will run Tuesday, April 23 – Thursday, April 25, 2013.  



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me