2007 IEEE Power Engineering Society General Meeting Scheduled for Tampa in June

The concept of “super sessions” will be introduced at the 2007 IEEE Power Engineering Society General Meeting in Tampa, Fla., scheduled for June 24 through 28, 2007 at the Tampa Convention Center and the Marriott Waterside Hotel in Tampa.

05/15/2007


The concept of “super sessions” will be introduced at the 2007 IEEE Power Engineering Society General Meeting in Tampa, Fla., scheduled for June 24 through 28, 2007 at the Tampa Convention Center and the Marriott Waterside Hotel in Tampa.

The super sessions consist of a series of presentations, designed to fully examine selected topics.

Walking Closer to the Edge and Vision 2020 are the two super sessions that have been developed so far. The former, specifically, will investigate the impact of increasing load demands that are being put on existing transmission systems.

The Vision 2020 sessions have been divided into three parts.

2020 Vision of Substations with presentations covering De-icer technologies, dealing with aged equipment, low SF6 MV switch and comparisons of DC/AC options.

Future Digital Substations with presentations focusing on cyber security, 61850 interoperability, advanced transducer concepts, and grounding issues, such as EM forces, PD radiation, step voltage shunt capacitors and advances in ground grid design.

Blackout Prevention will feature the latest concepts in event location prediction, power grid monitoring, state estimation, wide area reactive power control, and wide area visualization.

The General Meeting theme is “ Powering the Future, Today.”





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me