CFE Media
Webcast Series

Critical power: Transfer switches in switchgear

Thursday, August 14, 2014, at 11 a.m. PT /1 p.m. CT/2 p.m. ET

1 AIA CES accredited LU available for attendees

Click here to register.

When an interruption of electrical power occurs, an automatic transfer switch shifts loads between utility and generator power. During these transitions, transfer switch timing and sequence is critical to ensure proper system operation. Consulting engineers must understand transfer switch types, timing requirements, ratings, and the effects that the characteristic of each emergency load has on generator operation. They must also understand how a facility's electrical system (available fault current, number of generators, paralleling configuration) affects transfer switch choices.

Learning objectives:

  • The audience will understand the applicable codes: NFPA 110: Standard for Emergency and Standby Power Systems and NFPA 70: National Electrical Code (NEC)
  • Viewers will learn about open- and closed-transition automatic transfer switching including transfer switch timing and bypass considerations
  • Viewers will learn how to properly apply transfer switches and switchgear
  • Viewers will learn how to select transfer switch timing and sequencing to assure that the generator will assume and operate the selected loads.

Moderator: Jack Smith, Consulting-Specifying Engineer, Pure Power, and CFE Media, LLC

Join the discussion about this Webcast on Twitter at #CSEtransferswitch.

Register Now

Overview

Title: Critical power: Transfer switches in switchgear
Date: Thursday, Aug 14, 2014
Time: 11 a.m. PT/1 p.m. CT/2 p.m. ET
Duration: 45 minutes plus live Q&A

Join the discussion about this Webcast on Twitter at #CSEtransferswitch.

Presenters

Ken Lovorn

Ken Lovorn, PE, Lovorn Engineering Associates, Pittsburgh

 

Danna Jensen

Danna Jensen, PE, LEED AP BD+C, ccrd partners, Dallas

 

 


Sponsored by:


ASCO Generac Russelectric