CBS ArcSafe developed this RRS-3VB remote racking system single application tool for GE PowerVac circuit breakers, allowing service personnel to safely remove and install their PowerVac Switchgear while standing up to 150 ft...
FUSETRON 250 V FRN-R and 600 V RFS-R energy-efficient, dual-element, time-delay fuses are manufactured by Cooper Bussmann and allow for closer sizing to load with smaller fuse amp ratings than non-time-delay fuses on most motor...
The Cooper Bussmann CH Series of modular finger-safe DIN-Rail mountable fuse holders have a high SCCR rating up to 200 kA, available for electrical systems requiring class CC or midget fuse protection.
The Clēēr Loadbreak Connector system designed by Cooper Power Systems is a 600 A/15 kV single-phase rated loadbreak connector that offers a visible break and a visible ground without de-energizing, un-bolting 600 A terminations,...
Cooper Bussmann’s surge protective devices provide power quality that is free from damaging surges and overvoltage conditions, with specific modules for photovoltaic, wind power, UL, low-voltage, and IEC applications.
EntelliGuard R Retrofill from General Electric updates legacy circuit breakers with minimal modification, and is compatible with shutters, secondary and neutral disconnects, and position switches in existing breaker cubicles.
The Eaton switched combiner provides a single point to combine incoming photovoltaic strings and disconnect dc power close to PV modules, uniting Eaton’s 600 Vdc solar disconnect and source-combiner box in one enclosure.
Electric vehicle chargers manufactured by Legrand for residential and light commercial applications are weatherproof rated, have built-in ground fault protection, and are compatible with all plug-in electric vehicles.
Schneider Electric’s NF measurement and verification lighting panelboard is factory installed to monitor energy usage at the most granular branch circuit level and provide end-to-end power monitoring and control.