Courtesy: Brett Sayles, CFE Media and Technology
Building Automation and Controls January 26, 2024

Consulting-Specifying Engineer most-viewed automation, controls articles in 2023

Read the best articles about BACnet, health care, HVAC systems and more.

By Consulting-Specifying Engineer
Commissioning April 12, 2024

Top 5 Consulting-Specifying Engineer content, April 5-11, 2024

Top 5 articles this week covered topics including translating Baby Boomer language for younger workers, 2024 POY nominations, EV service equipment design and more. Miss something? You can catch up here.

By Chris Vavra
Figure 1: The 2024 edition of NFPA 101 has updated requirements for interior exit discharge. Courtesy: NFPA
Codes and Standards March 28, 2024

Consulting-Specifying Engineer most-viewed codes and standards articles in 2024

Read the best codes and standards articles about NFPA 101, ASHRAE, health care standards and more.

By Tyler Wall
Charger installation per Americans With Disabilities Act requirements. Courtesy: SmithGroup
Electrical and Power April 4, 2024

What are electric vehicle service equipment design considerations?

Learn electrical design options for electric vehicle (EV) charging stations

By Sam Cipkar, PE and Francesca Price, PE
A fire alarm control unit for a voice fire alarm system, which is often used in systems utilizing partial notification. Courtesy: Chris Campbell.
Fire and Life Safety April 5, 2024

Top 5 Consulting-Specifying Engineer content, March 29-April 4, 2024

By Anna Steingruber
Webcast presenters explained how to calculate pressure zones in high-rise buildings, and used a water riser diagram as part of the example. Courtesy: Consulting-Specifying Engineer
Plumbing, Pumping and Pumps April 5, 2024

Your questions answered: System design back to basics for plumbing, mechanical engineers

By Consulting-Specifying Engineer
Lighting and Lighting Controls March 20, 2024

Sustainable lighting choices under LEED indoor environmental quality guidelines

By Katherine Clark, PE
Figure 5: Before motors were replaced at a large Texas regional water supplier. Courtesy: Lockwood Andrews & Newnam Inc.
Motors and Drives January 24, 2024

Case study: Motors replaced at potable water plant

By Jeff Thomas

A Letter From The Editor

Consulting-Specifying Engineer is written and peer reviewed by engineers and industry professionals. These engineers design, specify and commission mechanical, electrical and plumbing (MEP), fire/life safety, lighting and controls systems for nonresidential buildings. Consulting-Specifying Engineer covers codes and standards, smart and high-performance buildings and design specifications in a variety of commercial buildings.

Amara Rozgus - Consulting-Specifying Engineer