Vortex flow sensors family

El Monte, Calif.— +GF+Signet expands it line of vortex flow sensors ranging in sizes 1/2 in. to 2 in., plus 3- and 4 in. wafer and flange versions. All are made with PVC, PP, or PVDF material to accommodate applications ranging from chemical delivery to deionized water distribution. Injection-molded to achieve a smooth surface finish for cleanliness and better chemical compatibility, th...

01/01/1970


El Monte, Calif.— +GF+Signet expands it line of vortex flow sensors ranging in sizes 1/2 in. to 2 in., plus 3- and 4 in. wafer and flange versions. All are made with PVC, PP, or PVDF material to accommodate applications ranging from chemical delivery to deionized water distribution. Injection-molded to achieve a smooth surface finish for cleanliness and better chemical compatibility, the sensors reduce manufacturing inconsistencies and in-service particulation. Sensors feature either frequency output or fixed 4-20 mA. They can be used with +GF+Signet's flow instrumentation to achieve better system functionality.

www.gfsignet.com

+GF+Signet

Circle 420





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me