Video: Integrating Measurement and Verification in Existing Building Commissioning Projects

This presentation will discuss the California Commissioning Collaborative’s guideline for verifying savings in EBCx projects, which informs commissioning service providers on how to design such an M&V program, including the approach, data requirements, calculation methodology, and integration into existing building commissioning.

01/21/2011


ACG 5th Annual Conference on Total Building Commissioning

Title: Integrating Measurement and Verification in Existing Building Commissioning Projects

Presenter: David Jump, Ph.D, PE, Quantum Energy Services & Technologies Inc

David Jump, Ph.D., P.E. is a Principal at Quantum Energy Services & Technologies (QuEST), a firm that provides energy audits and commissioning services, program management and project financing, and design and construction services throughout California. His teams have completed many commissioning projects in large commercial buildings, achieving up to 20% energy savings annually.

He leads development of industry-standard monitoring and savings verification protocols, methods, and case studies, and provides related research for the California Energy Commission.

Commissioning providers are often challenged to determine the energy savings that result from their work in buildings. Most large commercial buildings have much of the required resources to monitor their energy use, and commissioning providers can adopt M&V methods to prove the energy benefits to building owners, while maintaining their attention on the building where it is needed.

This presentation will discuss the California Commissioning Collaborative’s guideline for verifying savings in EBCx projects, which informs commissioning service providers on how to design such an M&V program, including the approach, data requirements, calculation methodology, and integration into existing building commissioning.

He is an ASHRAE member and active in professional organizations, including the California Commissioning Collaborative’s Advisory Board, is past president of the Building Commissioning Association’s Southwest Chapter, and currently is the chair of the Efficiency Valuation Organization’s International Performance Measurement and Verification Protocol Committee. David received a Ph.D. in Mechanical Engineering from the University of California, Santa Barbara and has over 18 years experience in the energy-engineering field.

Information provided by AABC Commissioning Group



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me