Variable frequency drives

The P-Series line of variable frequency drives by Cerus now comes with a redundant drive panel.

10/11/2012


The P-Series line of variable frequency drives by Cerus now comes with a redundant drive panel. Courtesy: Cerus IndustrialCerus’ P-Series line of variable frequency drives (VFDs) now comes with a redundant VFD unit, the Cerus redundant drive panel (RDP). It is designed to provide an economical HVAC motor control solution that maintains full control of an application if the primary drive fails. In the event of a failure, the backup VFD continues to run, using the same control signal as the primary drive. Every precaution has been taken to isolate each drive, thus isolating any problems that could occur and protecting the functionality of the working VFD. For broad applicability, the drives have been designed to support frequencies from 10 to 120 Hz, making the RDP a great solution for systems running over 60 Hz. Cerus P-Series VFDs are available in a range of versions from 1 to 125 hp. 

Cerus Industrial Inc. 

www.cerusind.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me