UK PV module price watch - Supply chain prices respond to feed-in tariff chaos

Although the UK saw record demand for PV modules up until the December 12th Feed-in tariff cut, on average December saw module prices in the UK decline in response to the heavy cuts that took place, albeit temporarily.

01/11/2012


Although the high court ruled that the changes to tariff were unlawful just over a week later and reversed the cuts; confusion over what the decision means for the industry, mixed with slow demand due to the Christmas break, means that prices have not yet had a chance to re-adjust to the news that the previous highly generous incentive levels appear to be on offer again - for the time being.

Average Supplier Prices Decline

Although December’s FiT cut forced some to pay inflated prices to secure modules via distributors before the FiT deadline, average prices for modules purchased direct from manufacturers declined by 6% over November’s level. The decline came as prices were adjusted to reflect the planned new incentive levels, and distributors and wholesalers cleared stock levels in anticipation of demand evaporating after the FiT cut.

Chart highlighting PV module market prices from the manufacturer. Courtesy: IMS Research

Chinese Tier-2 Pricing Declines to £0.66/W

Given the huge oversupply of PV modules that currently plagues the global PV industry; a spike in demand in the UK offered suppliers around the globe a much welcome opportunity to shift some of their bulging inventories and often at very attractive prices for their customers. This was particularly the case for Chinese Tier-2 manufacturers, who offered crystalline PV modules as low as £0.50/W during December, and average prices for these modules (purchased direct from manufacturers) fell to just £0.66/W during the month.

Despite declining by 15% in December, average crystalline module pricing direct from Japanese manufacturers remained significantly above their competition and over 30% higher than the market average. The long standing high-quality reputation of Japanese suppliers as well as the popularity of high efficiency products (e.g. Sanyo’s HIT module) in small roof-top installations which dominate the UK market, has allowed them to command a premium price.

Chart highlighting UK crystalline PV module market prices from the manufacturer. Courtesy: IMS Research

Rush to Purchase Modules Causes Spike in Distributor Pricing

Distributor pricing remained close to 25% higher than direct-manufacturer pricing in December as installers for small projects continued to favour purchasing in small quantities from local distributors and supply struggled to meet demand.

Although average prices from both distributors and manufacturers declined in December, a desperate rush to complete installations prior to the December 12th deadline, combined with a relatively short supply, saw some customers paying extremely high prices. Prices as high as £2.76/W were recorded for small orders from distributors and the range of prices (difference between highest and lowest prices) offered by distributors increased from £1.39 in November to an incredible £2.16 in December. In comparison, the range of prices offered directly by manufacturers remained fairly stable, as their longer lead times (due to modules not generally being located within the UK) meant that they were less able to provide modules in time to install before the FiT cut.

Chart highlighting overall UK crystalline PV module market prices. Courtesy: IMS Research

Prices To Continue Declining in January – Or Perhaps Not?

The pricing survey also asked respondents how they expected January’s prices to compare to December’s. As the majority of responses were received before the FiT cut was reversed, it is not surprising that the overwhelming majority were expecting prices to continue declining in January. Over 90% of survey respondents were expecting prices to decline in January, with almost 80% anticipating that prices would decline by over 5%. A weighted average of all responses suggests that average prices will decline by 5.5%, making average crystalline manufacturer prices around £0.82/W in January.

At the time of writing this article (January 3rd 2012), the industry is not only experiencing the same ‘first few days back after Christmas’ calm as many industries, but demand is currently stalled by confusion over what the high court’s ruling means for the industry - rather than the low tariff rates that people had previously expected would put the brakes on the market. As the month goes on, clarity will hopefully be restored and demand is likely to return, although some nerves from potential investors over future changes will prevent it reaching the levels that it did in November and early December. As end of year incentive reductions in other major European markets have pushed module prices in Europe lower still, prices in the UK are still predicted to decline this month. 

Chart highlighting overall predicted price increase/decrease in PV modules for January 2012. Courtesy: IMS Research

Profile photo of Sam Wilkinson, a senior market research analyst for IMS Research who specializes in the photovoltaics (PV) market. Courtesy: IMS ResearchJanuary and February will certainly be important months for the UK PV industry as it attempts to adjust once again to the ever changing business environment that relying on government subsidy schemes inevitably brings, and with volatile demand will almost certainly come volatile pricing!



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.